Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Oil Seal Ring

Model: Toyota Avensis T250, MK 2 - Years 2003-2008
Part: Engine

This video tutorial shows how to install a new oil seal ring on a Toyota Avensis. The oil seal is contained in a completely new package of components, gaskets, and various rings, which is opened carefully. Each piece is arranged neatly on the workbench; take the new oil seal ring. The pulley has been removed beforehand, so the ring must be placed in its housing, and after installation, it should be lubricated (using a finger) around its entire circumference. At this point, reassemble the crankshaft pulley by securing the central hub nut.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Replacing the MAP Sensor
Instructions for Replacing the MAP Sensor
Toyota Avensis (2003-2008 / T250, MK 2) The MAP (Manifold Absolute Pressure) sensor is the absolute pressure sensor generally installed on the intake manifold of turbocharged engines. In th…
Check Engine Oil Level and Top-Up
Toyota Avensis (1997-2003 / MK 1, T220) It is very important to periodically check the engine oil level, especially to ascertain if there are any issues related to its consumption. All engi…
How to Reset the Oil Light on Toyota Avensis
How to Reset the Oil Light on Toyota Avensis
Toyota Avensis (2009-2018 / T270, MK 3) In this video tutorial, you can see how to reset the engine oil management system on a Toyota Avensis. The first step is to perform vehicle maintenan…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos