Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Front Brake Pads

Model: Toyota Avensis T250, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Brake pads

See other generations:
Video tutorial

Replacing the brake pads is a straightforward but delicate operation as the vehicle's safety can be compromised. Remove the wheel and undo the retaining nuts of the cylinders.

Take out the cylinder assembly and carefully remove the worn pads with a screwdriver, ensuring not to scratch the brake disc. Clean the supports and refit the new pads, ensuring they are correctly seated in the supports.

Use a puller to remove the cylinder and replace it with a new one. Reassemble the cylinder group, the caliper, and tighten the relevant bolts, then you can refit the wheel.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Replacing Front Brake Pads and Discs
Replacing Front Brake Pads and Discs
Toyota Avensis (2003-2008 / T250, MK 2) Lift the vehicle and secure it. Remove the wheel and gently detach the caliper by removing the two retaining bolts with a ratchet spanner. Remove the…
Replacing Front Brake Pads and Disc
Replacing Front Brake Pads and Disc
Toyota Avensis (2003-2008 / T250, MK 2) To replace the brake pads and disc, first remove the wheel and lift the vehicle according to safety regulations. Next, unscrew the two bolts to remov…
Replacement of Front Brake Pads
Replacement of Front Brake Pads
Toyota Avensis (2003-2008 / T250, MK 2) Lift the vehicle on suitable axle stands and remove the front wheel. Then, unscrew the lower caliper mounting bolt only and use the upper one as a hi…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos