Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Interior Light Bulb Replacement

Model: Toyota Avensis T250, MK 2 - Years 2003-2008
Part: Interior dome light bulb

To replace the bulb in the interior light fixture, detach the fixture from the headlining by prying along the edges, taking care not to damage the plastic mounting clips. Once the fixture is detached, rotate the bulb holder to remove the old bulb and install the new one (T10 fitting). It is advisable to replace the other bulb as well to avoid having to repeat the operation soon, and consider using LED bulbs to enhance both the brightness and aesthetics of the interior.

Updated on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Number Plate Light Replacement on Toyota Avensis
Number Plate Light Replacement on Toyota Avensis
Toyota Avensis (2009-2018 / T270, MK 3) Remove the number plate light from a Toyota Avensis. Use a plastic lever to detach the rear panel of the tailgate; disconnect the power connectors fr…
Replacement of Side Indicator Bulb
Replacement of Side Indicator Bulb
Toyota Avensis (2003-2008 / T250, MK 2) Direction bulbs are very important in every car. Therefore, if they are burnt out, they must be replaced immediately. This is a very simple and easy …
How to Replace the Front Headlight Bulbs on a Toyota Avensis
How to Replace the Front Headlight Bulbs on a Toyota Avensis
Toyota Avensis (2003-2008 / T250, MK 2) In this guide, replace the front headlight bulbs on a Toyota Avensis. Open the front bonnet by pulling the lever located at the bottom right of the d…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos