Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Side Indicator Bulb

Model: Toyota Avensis T250, MK 2 - Years 2003-2008
Part: Side marker bulb

Direction bulbs are very important in every car. Therefore, if they are burnt out, they must be replaced immediately. This is a very simple and easy operation to perform. Remove the indicator lens by pulling it outwards and disconnect it from the connector. Take out the burnt bulb and replace it with a new one, ensuring it is always the same model. The bulb will have its specifications printed on it, including voltage and wattage. After this operation, refit the lens and test the new bulb.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the turn signal bulb of the Toyota Avensis side mirror
Replacement of the turn signal bulb of the Toyota Avensis side mirror
Toyota Avensis (2009-2018 / T270, MK 3) Today we will see the instructions that will allow us to disassemble and replace the turn signal bulb of the external rearview mirror of the Toyota A…
Interior Light Bulb Replacement
Interior Light Bulb Replacement
Toyota Avensis (2003-2008 / T250, MK 2) To replace the bulb in the interior light fixture, detach the fixture from the headlining by prying along the edges, taking care not to damage the pl…
How to Replace the Front Headlight Bulbs on a Toyota Avensis
How to Replace the Front Headlight Bulbs on a Toyota Avensis
Toyota Avensis (2003-2008 / T250, MK 2) In this guide, replace the front headlight bulbs on a Toyota Avensis. Open the front bonnet by pulling the lever located at the bottom right of the d…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos