Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb on a Toyota Avensis?

Model: Toyota Avensis MK 3, T270 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

To replace the front headlight bulb on a Toyota Avensis, open the bonnet to access the components inside the engine bay: here, on the inner part of the headlight assembly, you will find the headlight protection panel that needs to be removed. Once this panel is detached, pull the bulb out of its socket to disconnect the corresponding connector.

At this point, connect the new replacement part, inserting it into the bulb socket and ensuring everything is functioning.


Updated on 18 September 2026 by ScegliAuto


Related tutorials

How to replace the front headlamp bulb on the Toyota Avensis?
How to replace the front headlamp bulb on the Toyota Avensis?
Toyota Avensis (2003-2008 / T250, MK 2) To replace the front headlamp bulb on the Toyota Avensis, you need to loosen the screws that secure the front bumper to its housing: to remove it, yo…
How to Replace the Front Headlamp Bulb on the Toyota Avensis
How to Replace the Front Headlamp Bulb on the Toyota Avensis
Toyota Avensis (2009-2018 / MK 3, T270) Today, we will see, in this short and simple guide, the necessary steps to dismantle and replace the front headlamp bulb on the Toyota Avensis. First…
How to Replace the Rear Light Bulb on a Toyota Avensis
How to Replace the Rear Light Bulb on a Toyota Avensis
Toyota Avensis (2009-2018 / MK 3, T270) To replace the rear light bulb on a Toyota Avensis, open the rear hatch to access the components inside the boot. Here, you will locate the internal …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos