Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Toyota Avensis

Model: Toyota Avensis MK 3, T270 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light bulb

See other generations:
Video tutorial

To replace the rear light bulb on a Toyota Avensis, open the rear hatch to access the components inside the boot. Here, you will locate the internal protection panel of the light, which must be removed.

Doing this will allow you to slide out the bulb holder, disconnecting the rear light bulb and inserting the new replacement part; after the replacement, reinsert the light unit holder into its place, covering everything with the panel and checking that everything works correctly.


Updated on 29 September 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulbs on a Toyota Avensis
How to Replace the Front Headlight Bulbs on a Toyota Avensis
Toyota Avensis (2003-2008 / T250, MK 2) In this guide, replace the front headlight bulbs on a Toyota Avensis. Open the front bonnet by pulling the lever located at the bottom right of the d…
Replacing the Rear Light Bulbs on the Toyota Avensis
Replacing the Rear Light Bulbs on the Toyota Avensis
Toyota Avensis (2003-2008 / T250, MK 2) Below are the necessary instructions on how to remove and replace the bulbs in the rear light of the Toyota Avensis, in simple and quick steps. First…
How to Replace the Rear Light Bulb on Toyota Avensis
How to Replace the Rear Light Bulb on Toyota Avensis
Toyota Avensis (2003-2008 / T250, MK 2) Replacing the rear light bulbs on a Toyota Avensis is quite simple as they are easily accessible by removing the light unit. Inside the boot, near th…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos