Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on Toyota Avensis

Model: Toyota Avensis T250, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Tail light bulb

See other generations:
Video tutorial

Replacing the rear light bulbs on a Toyota Avensis is quite simple as they are easily accessible by removing the light unit. Inside the boot, near the rear light, you will notice a small flap cut into the carpet; opening this flap will give you access to the back of the light unit where three nuts secure it to the bodywork.

By removing the three nuts, you can then extract the light unit from the car and disconnect the power connector. At the back of the light unit, you will see a plastic cover held in place by two clips; once these are released, you will have access to the bulb holders.

At this point, you can replace all the bulbs in the light unit and then proceed to reassemble everything in the reverse order of disassembly.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on a Toyota Avensis
How to Replace the Rear Light Bulb on a Toyota Avensis
Toyota Avensis (2009-2018 / MK 3, T270) To replace the rear light bulb on a Toyota Avensis, open the rear hatch to access the components inside the boot. Here, you will locate the internal …
Replacement of the turn signal bulb of the Toyota Avensis side mirror
Replacement of the turn signal bulb of the Toyota Avensis side mirror
Toyota Avensis (2009-2018 / MK 3, T270) Today we will see the instructions that will allow us to disassemble and replace the turn signal bulb of the external rearview mirror of the Toyota A…
Replacing the Rear Light Bulbs on the Toyota Avensis
Replacing the Rear Light Bulbs on the Toyota Avensis
Toyota Avensis (2003-2008 / T250, MK 2) Below are the necessary instructions on how to remove and replace the bulbs in the rear light of the Toyota Avensis, in simple and quick steps. First…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos