Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Avensis
  6. : Headlight bulb

Toyota Avensis - Headlight bulb

Toyota Avensis (2003-2008 / T250, MK 2)
How do you replace the front headlight bulb of the Toyota Avensis?

In order to replace the headlight bulb of the Toyota Avensis, you need to loosen the screws that secure the front bumper to its housing. To remove the bumper, …read all…
Posted on 11 May 2024 by ScegliAuto
Toyota Avensis (2009-2018 / MK 3, T270)
How to replace the front headlight bulbs in the Toyota Avensis?

In this tutorial we can see how to replace the front headlight bulbs in the Toyota Avensis, an extremely simple and quick operation. First of all, make sure …read all…
Posted on 1 May 2024 by ScegliAuto
Toyota Avensis (2009-2018 / MK 3, T270)
How do you replace the headlight bulb of the Toyota Avensis?

The operation of replacing the headlight bulb on the Toyota Avensis involves opening the hood, so that access to the components inside the engine compartment …read all…
Posted on 10 March 2024 by ScegliAuto
Toyota Avensis (2003-2008 / T250, MK 2)
How to replace the front headlights bulbs on the Toyota Avensis?

In this tutorial, we can see how to replace the front headlight bulbs in the Toyota Avensis, an extremely simple and quick operation. First of all, make sure …read all…
Posted on 2 January 2024 by ScegliAuto
Toyota Avensis (2009-2018 / MK 3, T270)
How to replace the front headlight bulb of the Toyota Avensis.

Today we will see, in this short and simple guide, the necessary steps to disassemble and replace the headlight bulb of the Toyota Avensis. First of all, we …read all…
Posted on 6 August 2023 by ScegliAuto
Toyota Avensis (2003-2008 / T250, MK 2)
How to replace the headlight bulbs of a Toyota Avensis

Let's see how to replace the headlight bulbs of a Toyota Avensis. We open the front hood by pulling the lever located at the bottom right of the dashboard, …read all…
Posted on 20 November 2023 by ScegliAuto
Toyota Avensis (2003-2008 / T250, MK 2)
Removing the headlight bulb

To carry out this operation, first of all it is necessary to remove the grille, which is held in place with some latches placed at the top parallel to the …read all…
Posted on 25 July 2023 by ScegliAuto

Alternator (5) Car stereo (2) Battery (3) Coil (1) Spark plugs (2) Glow plugs (1) Bodywork (1) Control unit (1) Key (1) Timing belt (4) V-belt (2) -board computer (1) Checks and maintenance (29) Dashboard (1) Bearing (1) Brake discs (1) Air filter (3) Cabin air filter (6) Diesel filter (3) Side turn signal light bulb (1) Headlight bulb (7) Rear light bulb (3) Interior lights ceiling light bulb (1) License plate light (1) Engine (3) Starter motor (2) Engine oil (3) Door panel (1) Brake pads (3) Gear Shift Knob (2) Fuel pump (2) Push button (1) Instrument cluster (6) Wheel (1) Fuse box (10) Outside rearview mirror (1) Windscreen wipers (2) EGR valve (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos