Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Avensis
    4. : Air filter

Toyota Avensis - Air filter

Toyota Avensis (2003-2008 / T250, MK 2)
How to replace the air filter on a Toyota Comfort.
If we want to replace the engine air filter on this car, in the description that we can read below, we will find all the necessary information and steps and we …read all…
Posted on 14 April 2023 by ScegliAuto
Toyota Avensis (2003-2008 / T250, MK 2)
How to replace the air filter on Toyota Avensis
In this video tutorial we can see how it is possible to replace the air filter on Toyota Avensis, following some simple steps: the first thing to do is to buy …read all…
Posted on 11 September 2022 by ScegliAuto
Toyota Avensis (1997-2003 / MK 1, T220)
Engine air filter replacement
The engine air filter box (airbox) is located immediately behind the battery: unhook the metal tabs that secure the cover and remove it in order to extract the …read all…
Posted on 8 August 2023 by ScegliAuto
Alternator (5) Car stereo (2) Battery (3) Coil (1) Spark plugs (2) Glow plugs (1) Bodywork (1) Control unit (1) Key (1) Timing belt (4) V-belt (2) -board computer (1) Checks and maintenance (29) Dashboard (1) Bearing (1) Brake discs (1) Air filter (3) Cabin air filter (6) Diesel filter (3) Side turn signal light bulb (1) Headlight bulb (7) Rear light bulb (3) Interior lights ceiling light bulb (1) License plate light (1) Engine (3) Starter motor (2) Engine oil (3) Door panel (1) Brake pads (3) Gear Shift Knob (2) Fuel pump (2) Push button (1) Instrument cluster (6) Wheel (1) Fuse box (10) Outside rearview mirror (1) Windscreen wipers (2) EGR valve (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos