Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Avensis
  6. : Instrument cluster

Toyota Avensis - Instrument cluster

Toyota Avensis (2009-2018 / MK 3, T270)
How to reset the oil light on the 2013 Toyota Avensis

To manually reset the engine oil light on your 2013 Toyota Avensis, simply follow these steps. First, make sure you have correctly changed the engine oil and …read all…
Posted on 15 May 2024 by ScegliAuto
Toyota Avensis (2009-2018 / MK 3, T270)
To reset the service light of the Toyota Avensis 2012.

Usually, the orange service light on your Toyota Avensis third generation (year 2009-2018) automatically turns off as soon as the regular service is performed. …read all…
Posted on 25 October 2023 by ScegliAuto
Toyota Avensis (2009-2018 / MK 3, T270)
How to reset TPMS on Toyota Avensis

If while driving we notice that the low tire pressure warning light comes on, the first thing we must do is check the actual inflation pressure and proceed to …read all…
Posted on 8 May 2023 by ScegliAuto
Toyota Avensis (2009-2018 / MK 3, T270)
How to set the clock on Toyota Avensis

If we need to change the time on this car, we can find the very simple indications given in this description and also take a look at the video. The first thing …read all…
Posted on 14 April 2023 by ScegliAuto
Toyota Avensis (2009-2018 / MK 3, T270)
How to set the time of Toyota Avensis 3

In the following guide, we will find out together what are the various steps to carry out to be able to manually change the time shown on the mini display of …read all…
Posted on 4 December 2022 by ScegliAuto
Toyota Avensis (2009-2018 / MK 3, T270)
How to reset the Toyota Avensis service light

Thanks to the instructions in the following guide, you can manually reset the service warning light that appears on the instrument panel of your Toyota …read all…
Posted on 9 August 2022 by ScegliAuto

Alternator (5) Car stereo (2) Battery (3) Coil (1) Spark plugs (2) Glow plugs (1) Bodywork (1) Control unit (1) Key (1) Timing belt (4) V-belt (2) -board computer (1) Checks and maintenance (29) Dashboard (1) Bearing (1) Brake discs (1) Air filter (3) Cabin air filter (6) Diesel filter (3) Side turn signal light bulb (1) Headlight bulb (7) Rear light bulb (3) Interior lights ceiling light bulb (1) License plate light (1) Engine (3) Starter motor (2) Engine oil (3) Door panel (1) Brake pads (3) Gear Shift Knob (2) Fuel pump (2) Push button (1) Instrument cluster (6) Wheel (1) Fuse box (10) Outside rearview mirror (1) Windscreen wipers (2) EGR valve (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos