Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Avensis
    4. : Timing belt

Toyota Avensis - Timing belt

Toyota Avensis (2003-2008 / T250, MK 2)
Replacement of the timing belt for the Toyota Avensis D-4D.
Today we are discovering the guide on how to disassemble and replace the timing belt of the Toyota Avensis D-4D. First, we lift the car and begin to …read all…
Posted on 6 July 2023 by ScegliAuto
Toyota Avensis (2009-2018 / MK 3, T270)
How to replace the timing belt on Toyota Avensis
We disassemble and replace the timing belt of a Toyota Avensis: we lift the car on a column bridge, we disassemble the front wheel, with a screwdriver the …read all…
Posted on 8 November 2023 by ScegliAuto
Toyota Avensis (1997-2003 / MK 1, T220)
Timing belt replacement instructions
To be able to easily replace the timing belt, first of all it is necessary to remove some elements that interfere with the cascade of pulleys, such as the …read all…
Posted on 9 August 2023 by ScegliAuto
Toyota Avensis (2003-2008 / T250, MK 2)
Timing belt replacement
First disassemble the auxiliary belt and, since in order to be able to easily disassemble the timing belt, the engine support must also be removed, a jack must …read all…
Posted on 6 July 2023 by ScegliAuto
Alternator (5) Car stereo (2) Battery (3) Coil (1) Spark plugs (2) Glow plugs (1) Bodywork (1) Control unit (1) Key (1) Timing belt (4) V-belt (2) -board computer (1) Checks and maintenance (29) Dashboard (1) Bearing (1) Brake discs (1) Air filter (3) Cabin air filter (6) Diesel filter (3) Side turn signal light bulb (1) Headlight bulb (7) Rear light bulb (3) Interior lights ceiling light bulb (1) License plate light (1) Engine (3) Starter motor (2) Engine oil (3) Door panel (1) Brake pads (3) Gear Shift Knob (2) Fuel pump (2) Push button (1) Instrument cluster (6) Wheel (1) Fuse box (10) Outside rearview mirror (1) Windscreen wipers (2) EGR valve (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos