Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Avensis
    4. : Diesel filter

Toyota Avensis - Diesel filter

Toyota Avensis (2003-2008 / T250, MK 2)
How to replace the diesel filter of the Toyota Avensis 2.0 D-4D
Below we will see the instructions necessary to disassemble and replace the diesel filter of the Toyota Avensis 2.0 D-4D. First of all, we open the bonnet of …read all…
Posted on 19 December 2022 by ScegliAuto
Toyota Avensis (2009-2018 / MK 3, T270)
Toyota Avensis 2.2 D-4D diesel filter replacement
In this video we will see how to remove and replace the diesel filter of a Toyota Avensis 2.2 D-4D. First of all we open and lift the bonnet and we go to …read all…
Posted on 13 February 2024 by ScegliAuto
Toyota Avensis (2003-2008 / T250, MK 2)
how to remove the diesel filter on Toyota Avensis
Let's see how to remove the diesel filter present on a Toyota Avensis: we lift the front hood of the car, we identify the diesel filter (as in the video). With …read all…
Posted on 7 November 2023 by ScegliAuto
Alternator (5) Car stereo (2) Battery (3) Coil (1) Spark plugs (2) Glow plugs (1) Bodywork (1) Control unit (1) Key (1) Timing belt (4) V-belt (2) -board computer (1) Checks and maintenance (29) Dashboard (1) Bearing (1) Brake discs (1) Air filter (3) Cabin air filter (6) Diesel filter (3) Side turn signal light bulb (1) Headlight bulb (7) Rear light bulb (3) Interior lights ceiling light bulb (1) License plate light (1) Engine (3) Starter motor (2) Engine oil (3) Door panel (1) Brake pads (3) Gear Shift Knob (2) Fuel pump (2) Push button (1) Instrument cluster (6) Wheel (1) Fuse box (10) Outside rearview mirror (1) Windscreen wipers (2) EGR valve (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos