Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on a Toyota Avensis 2.0 D-4D

Model: Toyota Avensis T250, MK 2 - Years 2003-2008
Part: Diesel fuel filter

Here are the instructions to remove and replace the diesel filter on a Toyota Avensis 2.0 D-4D. First, open the engine bonnet and begin by removing the air filter box, disconnecting the mass airflow sensor and removing the intake hose (unscrewing the clamp screw). Next, disconnect the diesel lines from the filter, unplugging the electrical connector and unscrewing the nuts at the base to remove it, as shown in the video. Replace the filter cartridge with a new one and reassemble everything!

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Diesel Filter on Toyota Avensis
How to Remove the Diesel Filter on Toyota Avensis
Toyota Avensis (2003-2008 / T250, MK 2) Learn how to remove the diesel filter on a Toyota Avensis: lift the front bonnet of the car, locate the diesel filter (as shown in the video). Using …
Replacing the Fuel Filter on Toyota Avensis 2.2 D-4D
Replacing the Fuel Filter on Toyota Avensis 2.2 D-4D
Toyota Avensis (2009-2018 / T270, MK 3) In this video, you will learn how to remove and replace the fuel filter on a Toyota Avensis 2.2 D-4D. First, open and lift the bonnet and remove the …
How to Replace the Air Filter on a Toyota Avensis
How to Replace the Air Filter on a Toyota Avensis
Toyota Avensis (2003-2008 / T250, MK 2) In this video tutorial, you can see how to replace the air filter on a Toyota Avensis by following a few simple steps: first, purchase a new air filt…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos