Do it yourself
| ||||
|
Toyota Avensis - Alternator
Toyota Avensis (2009-2018 / MK 3, T270)
How to disassemble and replace the alternator of the Toyota Avensis Today's instructions will show us the main steps useful for disassembling and replacing the alternator of the Toyota Avensis. First, we lift the car and remove …read all… Posted on 20 March 2024 by ScegliAuto
Toyota Avensis (2009-2018 / MK 3, T270)
How to replace the alternator of the Toyota Avensis Today we will see the guide that will allow us to disassemble and replace the alternator of the Toyota Avensis, following the instructions below. First we open …read all… Posted on 1 November 2022 by ScegliAuto
Toyota Avensis (2003-2008 / T250, MK 2)
Changing alternator on a Toyota Avensis How to replace the alternator on a Toyota Avensis? Let's remove the car battery from inside the dedicated compartment to start, then lift the front hood. We …read all… Posted on 2 February 2024 by ScegliAuto
Toyota Avensis (2003-2008 / T250, MK 2)
Alternator replacement instructions If it happens that the battery warning light remains on on the instrument panel display then it is very likely that the alternator has stopped working: you can …read all… Posted on 19 August 2023 by ScegliAuto
Toyota Avensis (2003-2008 / T250, MK 2)
Replacement of alternator brushes The alternator has the function of maintaining a constant state of charge of the battery: when a malfunction occurs on the instrument panel, the warning light …read all… Posted on 3 August 2023 by ScegliAuto Alternator (5) Car stereo (2) Battery (3) Coil (1) Spark plugs (2) Glow plugs (1) Bodywork (1) Control unit (1) Key (1) Timing belt (4) V-belt (2) -board computer (1) Checks and maintenance (29) Dashboard (1) Bearing (1) Brake discs (1) Air filter (3) Cabin air filter (6) Diesel filter (3) Side turn signal light bulb (1) Headlight bulb (7) Rear light bulb (3) Interior lights ceiling light bulb (1) License plate light (1) Engine (3) Starter motor (2) Engine oil (3) Door panel (1) Brake pads (3) Gear Shift Knob (2) Fuel pump (2) Push button (1) Instrument cluster (6) Wheel (1) Fuse box (10) Outside rearview mirror (1) Windscreen wipers (2) EGR valve (2) Steering wheel (1) |
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |