Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Front Headlight Bulb

Model: Toyota Avensis MK 2, T250 - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Headlight bulb

See other generations:
Video tutorial

To carry out this operation, first remove the trim, which is held in place by clips located at the top parallel to the bumper, and move it just enough to release the headlight. You will need some sockets and a screwdriver to remove the bolts and the clip securing the headlight in its housing.

However, the bumper must be removed first. A spring holds the bulb in place, which can then be replaced without touching it with your hands, especially the glass part.

Insert the new bulb and headlight back into their housing, then reverse the procedure.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

Toyota Avensis (2003-2008 / MK 2, T250) In this guide, replace the front headlight bulbs on a Toyota Avensis. Open the front bonnet by pulling the lever located at the bottom right of the d…
Toyota Avensis (2009-2018 / T270, MK 3) Today, we will see, in this short and simple guide, the necessary steps to dismantle and replace the front headlamp bulb on the Toyota Avensis. First…
Toyota Avensis (2003-2008 / MK 2, T250) In this tutorial, you will see how to replace the front headlight bulbs on a Toyota Avensis, a very simple and quick operation. First, ensure that th…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos