Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the key shell of the Toyota Aygo?

Model: Toyota Aygo MK 1, Ab10 - Years 2005-2014
Part: Key

Let's find out how to replace the shell or casing of the key/remote control of the Toyota Aygo. The video guide uploaded above can help us, noting that it can also be considered for other Toyota cars if desired. Here's how to proceed: with a small flathead screwdriver, we pry at the joint of the two faces that make up the aforementioned shell, opening it up. Then, we proceed by unscrewing the small screw that secures the internal electronic board, allowing us to remove it. Using the reverse process, we install the new casing.

Posted on 31 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Toyota Aygo (2021-2026 / MK 3, Aygo X) In this very useful tutorial, we can see how to change the battery of a Toyota Aygo X key, a procedure also valid for other Toyota vehicles of the sa…
Toyota Aygo (2021-2026 / MK 3, Aygo X) In this guide, we will explain the various steps you need to follow to manually reset the oil light on your Toyota Aygo X (2023). First, start the in…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos