Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Toyota RAV 4

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Service warning light

Below we will discover the steps that will show us how to reset the maintenance service light on the Toyota RAV 4. First of all, we get on board the cabin and start the instrument panel; we press the button located at the bottom right of the panel until we reach the Trip A voice, as shown in the video. At this point we turn off the instrument panel, holding down the reset button and turning on the panel again; we then wait for the service mileage counter and maintenance warning to be reset permanently.

Posted on 16 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset and Reconfigure the Service on Toyota Rav 4
How to Reset and Reconfigure the Service on Toyota Rav 4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) Follow this guide to reset and reconfigure the service on a Toyota Rav 4: Turn on the instrument cluster with the appropriate remote key; switch on t…
How to reset the tire pressure warning light on the Toyota RAV4.
How to reset the tire pressure warning light on the Toyota RAV4.
Toyota Rav 4 (2013-2018 / MK 4, Xa40) In this guide, we will see the instructions that will allow us to reset the tire pressure warning light on the Toyota RAV4 using an OBD scanner. Befo…
How to reset the tire pressure light on the Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) The ignition of the tire pressure warning light indicates a possible puncture or loss of pressure; let's see how to reset the TPMS light on the Toyot…

    Frequently Asked Questions

    • Rav 4 2000-2006 - What does the oil light of the Toyota RAV4 indicate? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos