Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on the Toyota Aygo?

Model: Toyota Aygo Ab40, MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tire pressure warning light

See other generations:
Video tutorial

You will need to turn on the instrument panel, navigating through the menu that appears using the controls on the side spokes of the steering wheel to reset the tire pressure warning light on the Toyota Aygo: in the menu, you will need to select the "Vehicle settings" option and then proceed to the "TPWS Settings" option.

This will display a screen where you can select the "Set pressure" option, and when this option is selected, you must hold down the OK button for a few seconds; once this button is released, you will notice that the Service light has been completely reset.


Posted on 24 January 2026 by ScegliAuto


Related tutorials

How to reset the tire pressure warning light on the Toyota Aygo X.
How to reset the tire pressure warning light on the Toyota Aygo X.
Toyota Aygo (2021-2026 / MK 3, Aygo X) These brief and simple steps will allow us to reset the tire pressure warning light on the Toyota Aygo X after restoring the pressures on all four ti…
Resetting the Tyre Pressure Warning Light on the Toyota Aygo X
Resetting the Tyre Pressure Warning Light on the Toyota Aygo X
Toyota Aygo (2021-2026 / MK 3, Aygo X) In this guide, we will see the main instructions that will allow you to reset the tyre pressure warning light on the Toyota Aygo X; before performing…
How to Reset the Tyre Light on a Toyota Aygo?
How to Reset the Tyre Light on a Toyota Aygo?
Toyota Aygo (2014-2023 / Ab40, MK 2) To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Tu…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos