Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light in the 2023 Toyota RAV4?

Model: Toyota Rav 4 Xa50, MK 5 - Years 2019-2026
Part:

The tyre pressure warning light, especially in very recent vehicles like the 2023 Toyota RAV4, is accompanied by a message and a diagram of the four tyres on the vehicle's onboard computer. The attached video shows how this diagram appears and how it will inform you, clearly indicating which tyre has insufficient pressure. After inflating the indicated tyre, the warning light will turn off without any complicated actions; you simply need to drive the vehicle for a few minutes at a speed between 15 and 62 mph.

Posted on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on the Toyota RAV4?
How to Reset the Tyre Pressure Warning Light on the Toyota RAV4?
Toyota Rav 4 (2019-2026 / Xa50, MK 5) To reset the tyre pressure warning light on the Toyota RAV4, turn on the instrument panel by rotating the key in the ignition switch. Once the panel …
How to Reset the Tyre Pressure Warning Light on a Toyota RAV4
How to Reset the Tyre Pressure Warning Light on a Toyota RAV4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) In this short and simple guide, you will learn how to reset the tyre pressure warning light (TPMS) on a Toyota RAV4. Initially, when you turn on the …
How to Reset the Tyre Pressure Light on a Toyota RAV4
How to Reset the Tyre Pressure Light on a Toyota RAV4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) This tutorial shows you how to reset the tyre pressure warning light on a fifth-generation Toyota RAV4. Start by turning on the vehicle's ignition. T…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos