Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Toyota Highlander?

Model: Toyota Highlander Xu70 - Years 2020-2026
Part: Service warning light

You can completely clear the Service light displayed on the instrument cluster of the Toyota Highlander by turning on the instrument panel, inserting the ignition key into the ignition switch: once it is turned on, navigate through the menu until you select the gear icon. Then proceed to select "Vehicle settings" and subsequently "Scheduled maintenance": at this point, you need to hold down the OK button located on the side of the steering wheel until the light disappears completely.

Posted on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light in a Toyota Highlander
How to Reset the Service Light in a Toyota Highlander
Toyota Highlander (2014-2019 / Xu50) To reset the service light in a Toyota Highlander (XU50), turn the ignition to the ON position without starting the engine, and using the controls on…
How to Reset the Service Light on a 2013 Toyota Highlander
How to Reset the Service Light on a 2013 Toyota Highlander
Toyota Highlander (2008-2013 / Xu40) Today, you will learn how to reset the service light or oil light on a 2013 Toyota Highlander. Turn on the ignition and press the TRIP A button to se…
How to Reset the Tyre Pressure Warning Light on a Toyota Highlander?
How to Reset the Tyre Pressure Warning Light on a Toyota Highlander?
Toyota Highlander (2020-2026 / Xu70) You can completely clear the tyre pressure warning light on a Toyota Highlander by inflating the tyres to the optimal pressure value: once the tyres …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos