Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Spare Wheel from the Toyota Highlander

Model: Toyota Highlander Xu40 - Years 2008-2013
Part: Wheel

This guide shows the steps to remove the spare wheel from the Toyota Highlander's underfloor storage. First, remove the plastic protective cover of the spare wheel from underneath the vehicle; then open the boot and lift the shelf to access the wheel replacement kit, as shown in the video. At this point, use the supplied socket key to unscrew the spare wheel bolt (which will lower from below). Now you can proceed to replace the wheel with the spare!

Updated on 13 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Spare Wheel from the Toyota Highlander Xu50
How to Remove the Spare Wheel from the Toyota Highlander Xu50
Toyota Highlander (2014-2019 / Xu50) In this tutorial, you will learn how to remove the spare wheel from its compartment for replacement in case of a puncture on the Toyota Highlander Xu…
How to Remove the Front Door Panel on Toyota Highlander
How to Remove the Front Door Panel on Toyota Highlander
Toyota Highlander (2014-2019 / Xu50) In this brief guide, find instructions for removing the front door panel on a Toyota Highlander. First, open the front door of the vehicle and begin …
How to remove the front and rear seats of the Toyota Highlander.
How to remove the front and rear seats of the Toyota Highlander.
Toyota Highlander (2001-2007 / Xu20) In this guide, we will go over the main instructions that will allow us to disassemble and replace the front and rear seats of the Toyota Highlander.…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos