Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Manually Disable the Traction Control on 2006 Toyota Highlander

Model: Toyota Highlander Xu20 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Instrument cluster

See other generations:
Video tutorial

Before proceeding with the guide, remember that manually disabling the automatic traction control system should only be done in cases of serious malfunctions that require maintenance and/or replacement. Once inside the cabin (driver's side), insert the key and turn on the instrument cluster.

Immediately press the accelerator pedal four times in succession. Put the automatic gearbox in park mode and press the accelerator pedal another four times.

At this point, start the engine and the entire procedure is complete.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

How to deactivate the traction control of the Toyota Highlander
How to deactivate the traction control of the Toyota Highlander
Toyota Highlander (2014-2019 / Xu50) In a few simple steps, we will see how to deactivate the traction control system of the Toyota Highlander; however, it is recommended never to disabl…
How to Disable and Enable Traction Control on the Toyota Highlander
How to Disable and Enable Traction Control on the Toyota Highlander
Toyota Highlander (2014-2019 / Xu50) Here are the instructions to disable and enable the traction control on the Toyota Highlander. Remember that traction control should always be active…
How to Disable Lane Keeping Assist on the Toyota Highlander
How to Disable Lane Keeping Assist on the Toyota Highlander
Toyota Highlander (2020-2026 / Xu70) Briefly, we will see the instructions that will allow us to disable lane keeping assist on the Toyota Highlander. First, get inside the vehicle and t…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos