Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable Lane Keeping Assist on the Toyota Highlander

Model: Toyota Highlander Xu70 - Years 2020-2026
Part: Checks and maintenance

Briefly, we will see the instructions that will allow us to disable lane keeping assist on the Toyota Highlander. First, get inside the vehicle and turn on the ignition; then go to the onboard computer settings and then to driver assistance, disabling lane keeping assist. It is also possible to disable lane assist by turning off the front radar by pressing the appropriate button on the steering wheel; similarly, we will reactivate lane keeping assist and other driving controls and aids.

Posted on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Disable and Enable Traction Control on the Toyota Highlander
How to Disable and Enable Traction Control on the Toyota Highlander
Toyota Highlander (2014-2019 / Xu50) Here are the instructions to disable and enable the traction control on the Toyota Highlander. Remember that traction control should always be active…
How to Disable the Traction Control (TRC) on a Toyota Highlander
How to Disable the Traction Control (TRC) on a Toyota Highlander
Toyota Highlander (2008-2013 / Xu40) These simple steps will show you how to disable the traction control on a Toyota Highlander; it is advised not to disable traction control on the roa…
How to Disable Traction Control in a Toyota Highlander?
Toyota Highlander (2020-2026 / Xu70) To disable the traction control in the Toyota Highlander, insert the ignition key into the corresponding ignition switch: doing so will light up the …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos