Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Traction Control on the Toyota Highlander?

Model: Toyota Highlander Xu40 - Years 2008-2013
Part: Checks and maintenance

To disable the traction control on the Toyota Highlander, turn the ignition key to power up the instrument cluster. Once the cluster is on, locate the button under the steering column that allows you to disable the traction control. Pressing the button will illuminate the warning light on the instrument cluster, indicating that the system is disabled. To reactivate the system, simply press the same button again, and the warning light will disappear from the instrument cluster.

Updated on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Disable and Enable Traction Control on the Toyota Highlander
How to Disable and Enable Traction Control on the Toyota Highlander
Toyota Highlander (2014-2019 / Xu50) Here are the instructions to disable and enable the traction control on the Toyota Highlander. Remember that traction control should always be active…
How to Disable the Traction Control (TRC) on a Toyota Highlander
How to Disable the Traction Control (TRC) on a Toyota Highlander
Toyota Highlander (2008-2013 / Xu40) These simple steps will show you how to disable the traction control on a Toyota Highlander; it is advised not to disable traction control on the roa…
How to Disable Traction Control in a Toyota Highlander?
Toyota Highlander (2020-2026 / Xu70) To disable the traction control in the Toyota Highlander, insert the ignition key into the corresponding ignition switch: doing so will light up the …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos