Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable and Enable Traction Control on the Toyota Highlander

Model: Toyota Highlander Xu50 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
Video tutorial

Here are the instructions to disable and enable the traction control on the Toyota Highlander. Remember that traction control should always be active to ensure better road grip.

First, get into the vehicle and start the engine. Then, press the traction control button located at the bottom of the instrument panel to disable it, as shown in the video.

When traction control is disabled, a warning will appear on the dashboard; it will disappear when traction control is turned back on!


Updated on 1 August 2026 by ScegliAuto


Related tutorials

How to Disable the Traction Control (TRC) on a Toyota Highlander
How to Disable the Traction Control (TRC) on a Toyota Highlander
Toyota Highlander (2008-2013 / Xu40) These simple steps will show you how to disable the traction control on a Toyota Highlander; it is advised not to disable traction control on the roa…
How to Disable Traction Control in a Toyota Highlander?
Toyota Highlander (2020-2026 / Xu70) To disable the traction control in the Toyota Highlander, insert the ignition key into the corresponding ignition switch: doing so will light up the …
How to Disable the Traction Control on the Toyota Highlander?
How to Disable the Traction Control on the Toyota Highlander?
Toyota Highlander (2008-2013 / Xu40) To disable the traction control on the Toyota Highlander, turn the ignition key to power up the instrument cluster. Once the cluster is on, locate th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos