Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Highlander
  6. : How do you deactivate the traction control of the Toyota Highlander?

Toyota Highlander - Video tutorial

Model: Toyota Highlander Xu70 - Years 2020-2024
Part: Checks and maintenance
Operation: How do you deactivate the traction control of the Toyota Highlander?

To deactivate the traction control of the Toyota Highlander, you need to insert the ignition key into the corresponding slot. By doing so, you will notice that the instrument panel lights up, and you can use the controls on the dashboard. In particular, you need to locate the button with the icon of a skidding car at the bottom of the central panel. By holding down this button for approximately 6 seconds, you will see the indicator light indicating the deactivation of the traction control. To reactivate it, simply press the button again.


Posted on 23 January 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos