Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Rear Door Panel on a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Door trim panel

See other generations:
Video tutorial

The panel on this door is held in place by several screws and clips. The screws are located inside the lever that operates the lock and under a cover in the internal handle used to close the door.

After removing these, also detach the window winder lever secured with a small metal clip. Starting from the bottom, pry the panel away by applying pressure outward, gradually releasing it from its position.

Finally, disconnect the cables that operate the door opening.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of a Toyota Yaris
How to Remove the Door Panel of a Toyota Yaris
Toyota Yaris (2020-2026 / MK 4) Before you start, open the front door of your Toyota Yaris. Begin by unclipping and removing the window switch controls, then disconnect the associat…
Removing the Door Panel on a Toyota Yaris
Removing the Door Panel on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Is the door panel on your Toyota Yaris in need of replacement? Here’s how to remove it. Disconnect the battery terminals located in the engine bay (i…
How to Remove the Door Panel on a Toyota Yaris
How to Remove the Door Panel on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Before you start, open the door of your Toyota Yaris. Begin by unscrewing and removing the screws that secure the window switch, then pull out the sw…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos