Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Gear Knob

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Shift knob

See other generations:
Video tutorial

Removing the gear knob is a straightforward task but must be done gently. Obtain the new knob and proceed with the replacement.

With considerable force horizontally, grip the knob firmly with one hand and slowly rotate it counterclockwise. After the initial effort, unscrew the knob completely until it is fully removed.

This operation requires several turns. To fit the new knob, insert the cover ring, then proceed in reverse order, ensuring to tighten it fully and screw in the retaining Allen screws, then screw on the ring.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

How to Remove the Gear Knob of a Toyota Yaris
How to Remove the Gear Knob of a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) If you intend to replace the gear knob of a Toyota Yaris, first remove the currently fitted one. It is strongly advised to perform these operations w…
Replacing the Gear Knob on a Toyota Yaris
Replacing the Gear Knob on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Want to replace the gear knob on your Toyota Yaris? In this video, see how to remove it from the centre console. Use a plastic lever to disconnect th…
Gear Knob Replacement on Toyota Yaris
Gear Knob Replacement on Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) In this easy and intuitive video tutorial, you will learn how to remove the gear knob from a Toyota Yaris. This is a very simple operation that does …

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos