Do it yourself
Frequently asked questions about cars and motorcycles

Removing D4D Engine Injectors from Toyota

Model: Toyota Toyota Various
Part: Fuel injectors

In this video, you will learn how to remove the injectors from Toyota Diesel D4D engines. First, remove the intake hose along with the air filter box by unscrewing the clamp screw: then remove the upper wiring and disconnect the various electrical connectors. At this point, remove the injector covers using a flat screwdriver, and then proceed to remove the injectors, as illustrated in the video. It is also recommended to remove the fuel filter, which can sometimes be the main cause of injector blockage.

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Toyota Various In this video, we will see how to remove the cabin air filter from a Toyota FJ Cruiser. Open the glove compartment and disconnect the end stop bracke…
Toyota Toyota Various To replace the timing chain on a Toyota 1.4 D-4D engine, first remove the engine from its housing. This allows you to loosen the bolts securing the v…
Toyota Toyota Various In this video tutorial, you will see instructions on how to remove and replace the wheel trim on a Toyota, as well as on most vehicles available on t…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos