Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cabin Air Filter from a Toyota FJ Cruiser

Model: Toyota Toyota Various
Part: Cabin air filter

Video tutorial

In this video, we will see how to remove the cabin air filter from a Toyota FJ Cruiser. Open the glove compartment and disconnect the end stop brackets.

Then, pull the glove box out of the dashboard (disconnect any power cables if necessary). Open the plastic cover located over the filter housing, and slide out the dirty air filter from its housing as shown in the video.

Insert the new filter into its housing and reassemble all components along with the glove compartment as previously disassembled. Finally, check that everything is properly mounted.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

How do you reset the tire pressure light on the Toyota Urban Cruiser Hyryder?
How do you reset the tire pressure light on the Toyota Urban Cruiser Hyryder?
Toyota Toyota Various To reset the tire pressure warning light on the Toyota Urban Cruiser Hyryder, you need to inflate the tires until they reach the recommended pressure…
Placement of the fuse boxes of the Toyota Ist 2005
Placement of the fuse boxes of the Toyota Ist 2005
Toyota Toyota Various We see the location of the three fuse boxes of the Toyota Ist, a model known in Europe as the Urban Cruiser and in the USA as Scion, in case we need …
Removing and Replacing Wheel Trims on Toyota (Universal)
Removing and Replacing Wheel Trims on Toyota (Universal)
Toyota Toyota Various In this video tutorial, you will see instructions on how to remove and replace the wheel trim on a Toyota, as well as on most vehicles available on t…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos