Do it yourself
Frequently asked questions about cars and motorcycles

Removing and Replacing Wheel Trims on Toyota (Universal)

Model: Toyota Toyota Various

Video tutorial

In this video tutorial, you will see instructions on how to remove and replace the wheel trim on a Toyota, as well as on most vehicles available on the market. First, obtain something thin to pry at the edges of the wheel trim, such as a flat screwdriver; then, gently remove the wheel trim or cap as shown in the video.

Now, reinstall your wheel trim; to do this, remember the position of the valve on the wheel and align it with that of the wheel trim until it is correctly fitted!


Updated on 6 April 2026 by ScegliAuto


Related tutorials

Toyota Toyota Various In this video, we will see how to remove the cabin air filter from a Toyota FJ Cruiser. Open the glove compartment and disconnect the end stop bracke…
Toyota Toyota Various Today, you will learn how to independently change a wheel on a Toyota vehicle after a puncture. Inside the boot of your Toyota, you should find every…
Toyota Toyota Various In this video tutorial, learn how to disassemble and replace the battery in the smart key remote of some Toyota models. First, remove the key by pres…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos