Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in the Toyota Voxy?

Model: Toyota Toyota Various
Part: Cabin air filter

As shown in this tutorial, replacing the cabin filter in the Toyota Voxy is a very simple and economical task. Start by sitting in the passenger seat, then open the glove compartment, disconnect the damper on the outer side, and unclip it from the dashboard by pushing both sides inward. Once done, open the long rectangular cover, remove the old filter, and clean the housing of any debris. Finally, insert the new filter, ensuring it is oriented correctly as indicated along its edge.

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the Toyota Noah/Voxy?
Where is the fuse box located in the Toyota Noah/Voxy?
Toyota Toyota Various The Toyota Noah / Voxy contains two fuse boxes. The first fuse box is located inside the front hood, specifically next to the power supply battery. T…
How to Replace the Cabin Air Filter in the Toyota Fielder
How to Replace the Cabin Air Filter in the Toyota Fielder
Toyota Toyota Various In today's video, you will see how to replace the cabin air filter in the Toyota Fielder. First, obtain a new unit, available from both online and ph…
Removing the Cabin Air Filter from a Toyota FJ Cruiser
Removing the Cabin Air Filter from a Toyota FJ Cruiser
Toyota Toyota Various In this video, we will see how to remove the cabin air filter from a Toyota FJ Cruiser. Open the glove compartment and disconnect the end stop bracke…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos