Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the LED Bulbs in the Interior Light on a Toyota C-HR

Model: Toyota C Hr Ax10, MK 1, Ax50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Interior dome light bulb

See other generations:
Video tutorial

To replace the LED bulbs in the interior light on a Toyota C-HR, pry between the cover of the light and its perimeter (without breaking the plastics) and pull out the bulbs to be replaced. Replace any damaged bulbs with new ones of the same size and voltage.

After replacing all damaged bulbs, secure the transparent plastic cover back onto the light fixed in the roof lining. Test the operation of the light at the end of the installation (turn on the lights using the button or by opening the door).


Updated on 29 March 2026 by ScegliAuto


Related tutorials

Replacing Number Plate Bulb on Toyota CHR
Replacing Number Plate Bulb on Toyota CHR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) Replacing the number plate bulbs on the Toyota CHR is very simple: the bulb holders are located in the strip just above the number plate itself, belo…
Replacing the Interior Light Bulbs in a Toyota C-HR
Replacing the Interior Light Bulbs in a Toyota C-HR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) Let's see how to replace the interior light bulbs in a Toyota C-HR with LED bulbs. Start with the lights above the rear-view mirror: use a flathead s…
Replacing the Cabin Air Filter on the Toyota C-HR
Replacing the Cabin Air Filter on the Toyota C-HR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) Among routine maintenance tasks, it is necessary to replace the cabin air filter; let's see how to perform this operation on the Toyota C-HR. First, …

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos