Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Starter Motor on a RAV 4

Model: Toyota Rav 4 Xa20, MK 2 - Years 2000-2006
Part: Starter motor

Replace the starter motor on a Toyota RAV 4 with the necessary parts. Open the front bonnet and lift it, then disconnect the battery power cables. Unscrew the securing bolts of the air filter housing. Remove all covering containers to access the damaged starter motor. Disconnect the starter power terminals using pliers or a screwdriver, depending on the pressure of the tabs. Remove the component from its housing after taking out the securing screws. Fit the new starter motor, connecting the power cables and the accompanying securing screws. Reattach the previously removed plastic components.

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Starter Motor of a Toyota Rav 4
How to Replace the Starter Motor of a Toyota Rav 4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Before starting, open the bonnet of your Toyota Rav 4. Begin by removing the battery, followed by the battery support base. This will give you access…
Replacing Starter Motor on Toyota RAV4
Replacing Starter Motor on Toyota RAV4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) In this video tutorial, we will see the main instructions for disassembling and replacing the starter motor on a third-generation Toyota RAV4. First,…
Removing the Starter Motor on a Toyota Rav4
Removing the Starter Motor on a Toyota Rav4
Toyota Rav 4 (2000-2006 / Xa20, MK 2) Here’s how to remove the starter motor on a Toyota Rav4. Open the bonnet and secure it. First, disconnect the battery cables using a socket wrench. R…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos