Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor of a Toyota Rav 4

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Starter motor

Before starting, open the bonnet of your Toyota Rav 4. Begin by removing the battery, followed by the battery support base. This will give you access to the starter motor. Next, unscrew and remove the bolts securing the starter motor to the engine block. Then, disconnect the electrical connector. At this point, you can extract and remove the starter motor, completing the disassembly. To install the new starter motor, follow these steps in reverse, and you will have completed the replacement.

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Starter Motor on a RAV 4
Replacing the Starter Motor on a RAV 4
Toyota Rav 4 (2000-2006 / Xa20, MK 2) Replace the starter motor on a Toyota RAV 4 with the necessary parts. Open the front bonnet and lift it, then disconnect the battery power cables. Un…
Removing the Starter Motor on a Toyota Rav4
Removing the Starter Motor on a Toyota Rav4
Toyota Rav 4 (2000-2006 / Xa20, MK 2) Here’s how to remove the starter motor on a Toyota Rav4. Open the bonnet and secure it. First, disconnect the battery cables using a socket wrench. R…
Where is the starter motor located in the Toyota RAV4?
Where is the starter motor located in the Toyota RAV4?
Toyota Rav 4 (2006-2013 / MK 3, Xa30) In this video we can see where the starter motor is located in the Toyota RAV4 and how to proceed in case we need to replace it. As shown, the starte…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos