Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Standard Radio in Five Minutes

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Car stereo

See other generations:
Video tutorial

Do you need to replace the radio or want to install a different one from the standard? No problem, here’s how to do it in a few steps. Grab, one at a time, the two plastic side strips surrounding the radio and climate controls, starting from the bottom, pull the individual strip towards you while sliding your hands upwards, popping all the clips one by one. Once you have completely removed the strips, grab the speedometer cover and pull it towards you, removing it from its clips just as shown in the video, and take it out completely.

Using a screwdriver, unscrew the 4 screws holding the radio, as shown in the guide, there are 2 on each side, and unclip the 2 clips at the top. At this point, you can extract the block containing the radio and the air vents, being careful to disconnect the wiring, you can proceed with the final removal and installation of a new radio.


Updated on 1 February 2026 by ScegliAuto


Related tutorials

Toyota Yaris (1999-2005 / Xp10) Pull the three climate control knobs forward to remove them; unscrew the screws located beneath the first and third knobs. At this point, pull the ce…
Toyota Yaris (2005-2011 / Xp90) Want to remove the radio from the Yaris? Let's look at disassembling the components of the Toyota. Remove the plastic trim on the sides of the radio …
Toyota Yaris (2005-2011 / Xp90) Let's see how to replace the radio in the Toyota Yaris with all the covering pieces of the central dashboard. Remove the radio trim frame with a plas…

    Frequently Asked Questions

    • Yaris 2005-2011 - How much does an AUX cable cost for the 2006 Toyota Yaris? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos