Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlight on Toyota Yaris

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Headlight

See other generations:
Video tutorial

Loosen the wheel bolts related to the affected headlight (on the same side), lift the car and remove the wheel. Unscrew the bolts of the wheel arch liner and remove it. Unscrew the lower bolts of the front bumper, then move on to the upper ones.

Detach and move the bumper to create space to work on the headlight: while doing this, pay attention to the clip that secures the headlight to the bumper. Now unscrew the bolts that secure the headlight to the bumper and disconnect the connectors, then remove it. Insert the new headlight and reverse the process for reassembly.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

How to Remove the Headlamp from the Toyota Yaris 2
How to Remove the Headlamp from the Toyota Yaris 2
Toyota Yaris (2005-2011 / Xp90) How do you remove the headlamp from the Toyota Yaris? To remove the front headlamp of the Yaris, you need to take off the front bumper. Use a screwdr…
How to Remove Headlight Bulbs on Toyota Yaris
How to Remove Headlight Bulbs on Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Let's look at replacing the damaged bulbs inside the front headlight of a Toyota Yaris. Lift the bonnet and locate the back of the headlight. Remove …
How to Replace the Front Headlight Bulb on a Toyota Yaris
How to Replace the Front Headlight Bulb on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) This short video will show you how to remove and replace the front headlight bulb on a Toyota Yaris, following these simple steps. First, open the bo…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos