Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Air Filter Replacement

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Air filter

See other generations:
Video tutorial

Open the bonnet and locate the filter housing on the right side of the engine. Release the three clips attached to the cover by lifting them upwards, then carefully remove the housing by pulling it upwards from the support.

Remove the old filter and insert a new one. Before inserting the new filter, clean the interior of any dust deposits. Carefully close the air box, ensuring it fits perfectly with the cover.

Reassemble carefully and ensure that the clips are securely fastened. Start the engine and check for proper operation.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Air Filter on the 2015 Toyota Yaris
How to Replace the Engine Air Filter on the 2015 Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Changing the engine air filter in your 2015 Toyota Yaris is very simple. To do this, follow the brief procedure outlined in this guide. First, lift t…
How to replace the engine air filter of the Toyota Yaris
How to replace the engine air filter of the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) If you want to replace the engine air filter in your Toyota Yaris, you must carefully follow the instructions described in the following guide addres…
How to Replace the Air Filter on a Toyota Yaris 3
How to Replace the Air Filter on a Toyota Yaris 3
Toyota Yaris (2011-2019 / Xp130) To replace the engine air filter on your Toyota Yaris third generation (2011-2019), carefully read the following guide and follow the instructions. F…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos