Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Fan on Toyota Land Cruiser

Model: Toyota Land Cruiser MK 11, J200 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Blower motor

See other generations:
This video is currently unavailable

First, locate the exact position of the cabin fan: it is located on the passenger side, under the glove compartment (as shown in the video). To remove it, first disconnect the connector, then unscrew the three Torx T25 screws.

Done! At this point, pull out the housing with the fan and clean it or replace it as needed. Also, clean the area where the fan sits.

If this is a replacement, reverse the steps for reinstallation, screwing in the new fan and reconnecting the connector.


Updated on 13 April 2026 by ScegliAuto


Related tutorials

Where is the cabin fuse box located in the Toyota Land Cruiser J80?
Where is the cabin fuse box located in the Toyota Land Cruiser J80?
Toyota Land Cruiser (1990-1997 / MK 7, J80) To access the cabin fuse box in your Toyota Land Cruiser J80, follow the steps outlined below. Before starting, ensure the vehicle is parked on a fla…
Water Pump Replacement for Toyota Land Cruiser
Water Pump Replacement for Toyota Land Cruiser
Toyota Land Cruiser (2002-2009 / MK 10, J120) In this video tutorial, you will learn how to remove the water pump from a Toyota Land Cruiser: we will start by describing the main steps and observ…
Where is the fuse box located in the Toyota Land Cruiser J120?
Where is the fuse box located in the Toyota Land Cruiser J120?
Toyota Land Cruiser (2002-2009 / MK 10, J120) To locate the box containing all the fuses of your Toyota Land Cruiser j120, you must follow the steps described in our new guide addressed to you. F…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos