Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Water Pump Replacement for Toyota Land Cruiser

Model: Toyota Land Cruiser J120, MK 10 - Years 2002-2009
Part: Pump

In this video tutorial, you will learn how to remove the water pump from a Toyota Land Cruiser: we will start by describing the main steps and observing the video for a step-by-step guide. Open the bonnet and remove the upper plastic cover by unscrewing the screws. Then, lift the vehicle and drain the old coolant from the designated drain. Next, remove all hoses from the engine bay and proceed to extract the radiator fan; remove the auxiliary belt, and then you can access the water pump: unscrew it to remove and replace it!

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the Toyota Land Cruiser J120?
Where is the fuse box located in the Toyota Land Cruiser J120?
Toyota Land Cruiser (2002-2009 / J120, MK 10) To locate the box containing all the fuses of your Toyota Land Cruiser j120, you must follow the steps described in our new guide addressed to you. F…
Where is the cabin fuse box located in the Toyota Land Cruiser J80?
Where is the cabin fuse box located in the Toyota Land Cruiser J80?
Toyota Land Cruiser (1990-1997 / MK 7, J80) To access the cabin fuse box in your Toyota Land Cruiser J80, follow the steps outlined below. Before starting, ensure the vehicle is parked on a fla…
How to replace the battery of the Toyota Land Cruiser remote control?
How to replace the battery of the Toyota Land Cruiser remote control?
Toyota Land Cruiser (2021-2026 / J300) In this tutorial we can see how to replace the battery of the Toyota Land Cruiser remote control, an extremely simple and quick operation. To do this…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos