|
Do it yourself
| |||
| ||||
How to Remove the Door Panel on a Toyota Yaris
Model: Toyota Yaris
Xp130
- Years:
2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Video tutorial
Want to remove the door panel on a Yaris? Here's how to take off the panel along with its attached parts. Open the car door, then start by removing the plastic covers that conceal the securing screws (inside the door opening lever). Unscrew the screws located in the space of the upper door opening lever and remove the trim plastic near the switch panel (remove the switch panel). Unscrew the remaining screws on the door panel and detach the securing clips. Finally, pull the panel away by hand and disconnect it from the door (unplug the power wiring and the opening cable). Replace the cover panel if damaged.
Updated on 13 April 2026 by ScegliAuto
Related tutorials
Toyota Yaris
(1999-2005 /
Xp10)
Is the door panel on your Toyota Yaris in need of replacement? Here’s how to remove it. Disconnect the battery terminals located in the engine bay (i…
Toyota Yaris
(2011-2019 /
Xp130)
In this guide, we will see the steps that will allow us to disassemble and remove the front door panel of the Toyota Yaris. First, we open the front …
Toyota Yaris
(2005-2011 /
Xp90)
Today's instructions will show you how to remove and replace the front door panel of the Toyota Yaris. First, open the front door and start by detach…
Other guides you may be interested in
|
How to Reset the AdBlue Warning Light on a Peugeot Boxer
To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.022
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |