Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Windscreen Wiper Replacement on Yaris Hybrid

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Windshield wipers

See other generations:
Video tutorial

Let's look at the removal and replacement of the wiper blade on a Toyota Yaris. Grasp the front wiper blade with your hands, gently pull the movable blade as shown in the video, and slide it off the arm attached to the windscreen.

Fit the new blade onto the arm (if the blade is not original, detach the piece as shown in the video), and you will hear a click indicating it is secured. Finally, lower the wiper arm onto the windscreen and perform the same operation on the second blade.

Turn on the ignition to check the proper operation of the blades.


Updated on 17 April 2026 by ScegliAuto


Related tutorials

Removing the Rear Wiper on Toyota Yaris
Removing the Rear Wiper on Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) In this video, you will see how to replace the wiper on a Toyota Yaris. To remove the wiper, first lift the wiper arm: then press the button or lever…
How to Replace the Wiper Blade on a Toyota Yaris
How to Replace the Wiper Blade on a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Start by inserting the blade of a medium-sized flathead screwdriver into the slot beneath the wiper release clip, and apply a slight lever. This will…
How to replace the windshield wiper brush of a Toyota Yaris?
How to replace the windshield wiper brush of a Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) To replace the wiper blade of a Toyota Yaris, start by lifting the wiper arm from the windshield until it is in a vertical position. Locate the small…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos