Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on Toyota RAV 4 from 2006

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

To reset the service light on a Toyota RAV 4 produced from 2006, follow these steps: turn on the ignition, select the trip section using the button on the instrument panel (which is shown in the video). Turn off the ignition and press the button again, holding it down.

While doing this, turn the ignition back on with the key and wait until the reset is complete. Turn off and on again as a final check.

Note that the reset should not be performed unless the service has actually been carried out to avoid engine damage and more.


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on the Toyota RAV4
How to Reset the Tyre Pressure Light on the Toyota RAV4
Toyota Rav 4 (2025-2026 / Xa60) Today we will see the instructions that will allow us to reset the tyre pressure light on the Toyota RAV4; before resetting the TPMS sensors, ensure …
How to reset the Service light on the Toyota RAV 4?
How to reset the Service light on the Toyota RAV 4?
Toyota Rav 4 (2000-2006 / MK 2, Xa20) To reset the Service light on the Toyota RAV 4, press and hold the button located on the left side of the instrument panel, just below the speedomete…
Resetting the Maintenance (Service) Light on the Toyota RAV 4
Resetting the Maintenance (Service) Light on the Toyota RAV 4
Toyota Rav 4 (2000-2006 / MK 2, Xa20) Today, let's go through the instructions for resetting the maintenance service light on the Toyota RAV 4. First, get into the vehicle and start the i…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos