Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on the Toyota RAV 4?

Model: Toyota Rav 4 Xa20, MK 2 - Years 2000-2006
Part: Service warning light

To reset the Service light on the Toyota RAV 4, press and hold the button located on the left side of the instrument panel, just below the speedometer, while the panel is off. While holding the button, insert the ignition key into the lock and turn it to switch on the panel. Continue to hold the button for a few seconds until the Service light disappears from the instrument panel. Once the reset is complete, you can turn off the panel.

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Toyota RAV 4?
How to Reset the Service Light on a Toyota RAV 4?
Toyota Rav 4 (2019-2026 / Xa50, MK 5) To reset the Service light on a Toyota RAV 4, turn on the ignition and navigate through the menu using the controls on the left side of the steering …
How to Reset the Service Light on the Toyota RAV 4
How to Reset the Service Light on the Toyota RAV 4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) To reset the Service light on the Toyota RAV 4, turn on the ignition and navigate through the menu using the controls on the left side of the steerin…
How to Reset the Service Light on the Toyota Rav 4 MK5
How to Reset the Service Light on the Toyota Rav 4 MK5
Toyota Rav 4 (2019-2026 / Xa50, MK 5) This guide shows you the steps to reset the service light for the routine maintenance oil change on the fifth series Toyota Rav 4, following the inst…

    Frequently Asked Questions

    • Rav 4 2000-2006 - What does the oil light of the Toyota RAV4 indicate? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos