Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Rav 4
  6. : How do you replace the injectors of the Toyota Rav 4?

Toyota Rav 4 - Video tutorial

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Injectors
Operation: How do you replace the injectors of the Toyota Rav 4?

In order to replace the Toyota RAV 4 injectors, the hood must be opened to gain access to the engine compartment. Subsequently, all the bolts that secure the steel plate of the upper part of the engine must be loosened, which must also be freed from pipes and connectors. Once the plate is free, it can be extracted and the injectors can be extracted from their housing by unscrewing them using a socket wrench. When all the injectors have been extracted, it will be possible to replace them with new spare parts and install all the parts previously removed.


Posted on 12 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Rav 4 2013-2018 - What problems affect the Toyota RAV4 xa40 injectors? Read Answer
    • Rav 4 2013-2018 - What problems with the Toyota Rav4 injector? Read Answer
    • Rav 4 2006-2013 - How much does the additional injector cost of a Toyota Rav 4? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos