Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on the Toyota Yaris?

Model: Toyota Yaris MK 4 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

After a puncture or losing pressure in the tyres due to normal wear, once the correct state is restored, you need to manually remove the warning light that will have appeared on the instrument panel. This operation in the Toyota Yaris Hybrid is very simple, as there are no particular procedures to follow.

Simply turn on the instrument panel and press and hold the small button located under the dashboard, approximately at the height of the pedals. The light will start to flash and then disappear.

Turn off and on the instrument panel again to check that the reset was successful.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on a Toyota Yaris?
How to Reset the Tyre Pressure Warning Light on a Toyota Yaris?
Toyota Yaris (2020-2026 / MK 4) To reset the tyre pressure warning light on a Toyota Yaris, inflate the tyres until they reach the correct pressure value. Next, turn on the ignition…
How to Reset the Tyre Pressure Warning Light on the Toyota Yaris?
Toyota Yaris (2020-2026 / MK 4) To reset the tyre pressure warning light on the Toyota Yaris, first inflate the tyres to the correct pressure value, which is indicated on the sticke…
How to Reset the Tyre Pressure Warning Light on a Toyota Yaris?
How to Reset the Tyre Pressure Warning Light on a Toyota Yaris?
Toyota Yaris (2020-2026 / MK 4) To reset the tyre pressure warning light on a Toyota Yaris, first inflate the car's tyres to the recommended pressure value: this value is written on…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos