Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Track Rod Ends on a Toyota Aygo

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tie rods

See other generations:
Video tutorial

In this video tutorial, you will see how to remove and replace the track rod ends on a first-generation Toyota Aygo. First, loosen the bolts of the front wheel; then lift the vehicle and remove the wheel. At this point, remove the split pin from the bolt securing the track rod, which connects it to the braking system; then unscrew the track rod end bolt and remove the track rod along with the end itself, as shown in the video.

Finally, replace everything with the new original components and reassemble them by applying the reverse procedure!


Updated on 30 April 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on the Toyota Aygo X 2023
How to Reset the Oil Light on the Toyota Aygo X 2023
Toyota Aygo (2021-2026 / MK 3, Aygo X) In this guide, we will explain the various steps you need to follow to manually reset the oil light on your Toyota Aygo X (2023). First, start the in…
Resetting the Tyre Pressure Warning Light on the Toyota Aygo X
Resetting the Tyre Pressure Warning Light on the Toyota Aygo X
Toyota Aygo (2021-2026 / MK 3, Aygo X) In this guide, we will see the main instructions that will allow you to reset the tyre pressure warning light on the Toyota Aygo X; before performing…
How to Remove the Rear Light of a Toyota Aygo
How to Remove the Rear Light of a Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) Before you start, open the tailgate of your Toyota Aygo. Begin by unscrewing and removing the screw that secures the side cover of the boot. Next, mo…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos