Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulb in a Toyota Highlander?

Model: Toyota Highlander Xu50 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

This video demonstrates how to replace the dipped beam bulb in a Toyota Highlander. It is a simple and quick operation, and it is recommended to use LED H11 bulbs, which provide intense illumination with low power consumption.

Start by opening the bonnet and unscrewing the large rear cover of the headlamp. Disconnect the power connector and remove the bulb by turning it approximately 90 degrees counterclockwise.

Insert the replacement bulb and complete the operation by reversing the procedure. Repeat for the opposite headlamp if necessary.


Updated on 3 May 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb of the Toyota Highlander?
How to Replace the Rear Light Bulb of the Toyota Highlander?
Toyota Highlander (2008-2013 / Xu40) To replace the rear light bulb of the Toyota Highlander, open the boot lid and remove the side panel corresponding to the bulb that needs replacing. …
How to replace the rear taillight bulb of the Toyota Highlander
How to replace the rear taillight bulb of the Toyota Highlander
Toyota Highlander (2020-2026 / Xu70) If you want to replace the rear headlight bulb of your latest model Toyota Highlander by yourself, simply follow the procedure described below. First…
How to Replace the Rear Headlamp Bulbs on a Toyota Highlander?
How to Replace the Rear Headlamp Bulbs on a Toyota Highlander?
Toyota Highlander (2014-2019 / Xu50) Replacing the rear headlamp bulbs on the Toyota Highlander is a straightforward task. Start by opening the tailgate and removing the plastic panel us…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos