Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Highlander
    4. : How to replace the rear light bulb on the Toyota Highlander?

Toyota Highlander - Video tutorial

Model: Toyota Highlander Xu40 - Years 2008-2013
Part: Light bulb
Operation: How to replace the rear light bulb on the Toyota Highlander?

In order to replace the rear light bulb of the Toyota Highlander it is necessary to open the tailgate of the luggage compartment, and remove the side panel corresponding to the bulb to be replaced. Once the panel has been removed, it will be possible to extract the bulb from inside its housing by disconnecting it from its connector. The new bulb must then be connected to the latter, which will be fixed again inside its housing. After the bulb has been replaced, the interior trunk panel can be re-fitted.


Posted on 15 August 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos