Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on the Toyota Highlander

Model: Toyota Highlander Xu50 - Years 2014-2019
Part: Light bulb

Fortunately, replacing a front headlight bulb is a task that does not require any mechanical experience and can be easily done by anyone. Just carefully follow these steps. Go to the driver's side and unlock the front bonnet, then fully lift it. Disconnect the negative terminal of the battery to perform the replacement safely. Locate the connector attached to the bulb you want to replace and disconnect it. At this point, simply turn the bulb counter-clockwise to remove it. Replace it with a new one and reconnect the connector. Finally, reconnect the battery and close the bonnet.

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on the Toyota Highlander Xu40
How to Replace the Headlight Bulb on the Toyota Highlander Xu40
Toyota Highlander (2008-2013 / Xu40) Today, we will see the procedure necessary for removing and replacing the dipped beam bulb of the front headlight on the Toyota Highlander Xu40 in si…
How to Replace the Front Headlight Bulb on a Toyota Highlander
How to Replace the Front Headlight Bulb on a Toyota Highlander
Toyota Highlander (2008-2013 / Xu40) To replace the front headlight bulb on a Toyota Highlander, open the bonnet to access the rear of the corresponding headlight. Here, you will find th…
How to Replace the Rear Headlamp Bulbs on a Toyota Highlander?
How to Replace the Rear Headlamp Bulbs on a Toyota Highlander?
Toyota Highlander (2014-2019 / Xu50) Replacing the rear headlamp bulbs on the Toyota Highlander is a straightforward task. Start by opening the tailgate and removing the plastic panel us…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos